| D C WELDING | MODEL | GE – W 8000D |
| Maximum Output (Duty Cycle 60%) | 275 Amps. | |
| Working Voltage | 20 v to 35 v | |
| Open Circuit Voltage | 70 Volt (Maximum) | |
| Current Regulation | *40-275 Amps. | |
| Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
| Maximum Electrode Diameter | 2.6 mm to 5.0 mm | |
| A C GENERATOR | Type | Brush less with Rear Earth Magnet Rotor. |
| AC. Voltage On Eco Mode | 220 Volts ± 10 Volts, Single Phase | |
| AC. Voltage On Power Mode (No Load) | 250 Volts (No Load) ± 10 Volts, Single Phase | |
| Rated Current | 20.5 Amps. | |
| NFB | 21 Amps. | |
| Rated Power | 4500VA | |
| Peak Power | 5000 VA | |
| Frequency | 50 to 60 Hz. | |
| Class of Insulation | F | |
| ENGINE | Model | HM192F |
| Type | 4-Stroke, OHV, Vertical, Single Cylinder, Direct Injection | |
| Maximum Power | 14HP | |
| Bore x Stroke | 92x72mm | |
| Displacement | 499cc | |
| Starting System | Recoil / Self Start | |
| Fuel | Standard Diesel | |
| Fuel Tank Capacity | 13 Liters | |
| #Fuel Consumption Ltr./Hr. | 1.3 Ltr./hr. | |
| Continuous Operating Hour | 10. hr. | |
| Lube. Oil Capacity | 1650 ml. | |
| Lubricating Oil Consumption | 4.3 gm./Hr. | |
| Standard Accessories | AC Plug | 1 Pcs. |
| Tool Kit | 1 Set | |
| Welder Holder with Cable | 1 Set | |
| Earthling Clamp with Cable | 1 Set | |
| Oil Funnel | 1 No. | |
| Owner’s Manual | 1 No. | |
| Battery Terminal | 1 Set | |
| Battery Tray & Holding Set | 1 Set | |
| *Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current up to 40 Amps.) |
1 Kit (Additional Cost) |
| Costar Wheels | Optional (Wheels & Handle Sets) @ (Additional Cost) | |
| Panel & Other Standard Features |
A.C. Circuit Protector | Yes |
| Engine Oil Protection | Electronic Oil Alert & Indicator | |
| Low Fuel Protection | Yes | |
| A.C. Pilot Lamp | Yes | |
| Fuel Level Gauge | Yes | |
| A.C. Output Sockets | 1 Nos. | |
| Packing | Dimensions (L x W x H mm) | 710X500X600 mm |
| Dry Weight (Kgs.) Without Battery | 115 kgs. | |
| Battery Capacity | 12 Volt, 35Ah, Size : 190x120x225 (LxWxH) | |
| Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation | ||
NOTE: All Standard Self Start Model Gensets Are Supplied Without Battery/ Battery to Be Procured By the Dealer /Customer Only
Related Products
Diesel High Torque Multipurpose Engines
Diesel Portable Generators Series. (3 Phase) Export Model
Rs.171,150.00
Multi Purpose Engines
Multi Purpose Engines