D C WELDING | Model | GE-W 5500R |
Maximum Output (Duty Cycle 60%) | 175 Amps. | |
Working Voltage | 20v to 30 v | |
Open Circuit Voltage | 65 Volt (Maximum) | |
Current Regulation Amps | *40-175 | |
Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
Maximum Electrode diameter | 2.6 mm to 4.0 mm | |
AC GENERATOR | Type | Brush less with Rear Earth Magnet Rotor. |
AC. Voltage On Eco Mode | 220 Volts ± 10 Volts, Single Phase | |
AC. Voltage On Power Mode (No Load) | 250 Volts ± 5 Volts, Single Phase | |
Rated Current | 12 Amps. | |
NFB Amps | 12 Amps. | |
Rated Power | 2500 VA | |
Peak Power (for 1 Minute) | 3000 VA | |
Frequency | 50 to 60 Hz. | |
Class of Insulation | F | |
ENGINE | Model | HM170FB |
Type | Single Cylinder Air-cooled; 4-stroke, OHV 25˚ Inclined | |
Maximum Power | 7.5 HP | |
Bore x Stroke | 70×58 | |
Displacement | 223cc | |
Starting System | Recoil Start | |
Ignition System | TCI (Transistor Control Ignition) | |
Fuel | Standard Petrol | |
Fuel Tank Capacity | 4 Liters | |
Fuel Consumption # Ltr./Hr. | 1.0 Ltr./hr. | |
continuons Operating Hour | 4 hr. | |
Lube. Oil Capacity | 600 ml. | |
Lubricating Oil Consumption | 2.5 gm./Hr. | |
Standard Accessories | AC Plug | 1Pec. |
Tool Kit | 1 Set | |
Welder Holder | 1 Set | |
Earthing Clamp with Cable | 1 Set | |
Oil Funnel | 1 No. | |
Owner’s Manual | 1 No. | |
Battery Terminal | N/A | |
Battery Tray & Holding Set | N/A | |
*Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current upto 50 Amps.) |
1 Kit (Additional Cost) |
Costar Wheels | N/A | |
Panel & Other Standard Features |
A.C. Circuit Protector | Yes |
A C.Pilot Lamp | Yes | |
Engine Oil Protection | Electronic Oil Alert & Indicator | |
Fuel Level Gauge | No | |
A.C. Output Sockets | 1 Nos. | |
Packing | Dimension LxWxH (mm) | 630x500x600 mm |
Dry Weight (Kgs.) | 50 Kgs. | |
Above Specifications are for reference only, Because of continuons improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation |
GE-W 5500R
Rs.117,850.00
Generator Welding Machine (Petrol)
Maximum Output (Duty Cycle 60%) 175 Amps., Working Voltage 20v to 30 v, Open Circuit Voltage 65 Volt (Maximum)
Category: Generator Welding Machine (Petrol)
Tags: petrol, welding
Related Products
Gasoline Multi Purpose Engines
Petrol Silent Generators (Single Phase)
Rs.136,950.00
Generator Welding Machine (Petrol)
Rs.186,250.00
Petrol Silent Generators (Single Phase)
Rs.176,750.00