D C WELDING | MODEL | GE-W 5500D |
Maximum Output (Duty Cycle 60%) | 160 Amps. | |
Working Voltage | 20 v to 30 v | |
Open Circuit Voltage | 60 Volt (Maximum) | |
Current Regulation | *40-160 Amps. | |
Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
Maximum Electrode Diameter | 2.6 mm to 3.17 mm | |
A C GENERATOR | Type | Brush less with Rear Earth Magnet Rotor. |
AC. Voltage On Eco Mode | N/A | |
AC. Voltage On Power Mode (No Load) | 250 Volts (No Load) ± 10 Volts, Single Phase | |
Rated Current | 7.5 Amps. | |
NFB | 7.5 Amps. | |
Rated Power | 1800VA | |
Peak Power | 2000 VA | |
Frequency | 58 to 60 Hz. | |
Class of Insulation | F | |
ENGINE | Model | TP170FA |
Type | 4-Stroke, OHV, Single Cylinder, Direct Injection, Swirl Chamber, Inclined type | |
Maximum Power | ||
Bore x Stroke | 70x60mm | |
Displacement | 231cc | |
Starting System | Recoil / Self Start | |
Fuel | Standard Diesel | |
Fuel Tank Capacity | 3.5 Liters | |
#Fuel Consumption Ltr./Hr. | 0.65 Ltr./hr. | |
Continuous Operating Hour | 5.5 hr. | |
Lube. Oil Capacity | 800 ml. | |
Lubricating Oil Consumption | 3.2 gm./hr. | |
Standard Accessories | AC Plug | 1 Pec. |
Tool Kit | 1 Set | |
Welder Holder with Cable | 1 Set | |
Earthling Clamp with Cable | 1 Set | |
Oil Funnel | 1 No. | |
Owner’s Manual | 1 No. | |
Battery Terminal | 1 Set | |
Battery Tray & Holding Set | 1 Set | |
*Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current up to 40 Amps.) |
1 Kit (Additional Cost) |
Costar Wheels | Optional (Wheels & Handle Sets) @ (Additional Cost) | |
Panel & Other Standard Features |
A.C. Circuit Protector | Yes |
Engine Oil Protection | No | |
Low Fuel Protection | No | |
A.C. Pilot Lamp | Yes | |
Fuel Level Gauge | No | |
A.C. Output Sockets | 1 Nos. | |
Packing | Dimensions (L x W x H mm) | 630x500x600 mm |
Dry Weight (Kgs.) | 55 Kgs. | |
Above Specifications are for reference only, Because of Continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation |
GE-W 5500D
Rs.120,250.00
Generator Welding Machine (Diesel)
Maximum Output (Duty Cycle 60%) 160 Amps.
Working Voltage 20 v to 30 v
Open Circuit Voltage 60 Volt (Maximum)
E-Mail:- [email protected]
https://www.gastechelectronics.co.in
http://www.portabledieselengines.com
http://www.weldinggeneratormachines.com
http://www.himalayanpowermachine.com
https://www.gastechproducts.com/