D C WELDING | MODEL | GE -3P-W8000D |
Maximum Output (Duty Cycle 60%) | 200 Amps. | |
Working Voltage | 20 v to 35 v | |
Open Circuit Voltage (OCV) | 70 Volt (Maximum) | |
Current Regulation | *40-200 Amps. | |
Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
Maximum Electrode Diameter | 2.6 mm to 4.0 mm | |
A C GENERATOR | Type | Brush less with Rear Earth Magnet Rotor. |
Max. AC Output (3-Phase) | 5000 VA | |
Rated AC Output (3-Phase) | 4500 VA | |
Circuit Breaker (3-Phase) | 6.5 Amps. Each Phase | |
AC. Voltage (3-Phase) | 415 Volts ± 10 Volts, Three Phase | |
Max. AC Output (Single Phase) | 3000 VA | |
Rated AC Output (Single Phase) | 2500VA | |
Auxiliary AC Voltage (Single Phase) | 240 Volts ± 10 V, Single Phase | |
Rated Current (Single Phase) | 12 Amps. | |
Circuit Breaker (Single Phase) | 12 Amps. | |
Frequency | 50 to 60 Hz. | |
Class of Insulation | ‘F’ | |
ENGINE | Model | HM192F |
Type | 4-Stroke, OHV, Vertical, Single Cylinder, Direct Injection | |
Maximum Power | 14HP | |
Bore x Stroke | 92×72 | |
Displacement | 499cc | |
Starting System | Recoil/ Electric Start | |
Ignition System | N/A | |
Fuel | Standard DIESEL | |
Fuel Tank Capacity | 13 Liters | |
Fuel Consumption # Ltr./Hr. | 1.3 Ltr./hr. | |
Continues Operating Hour | 10. hr. | |
Lube. Oil Capacity | 1650 ml. | |
Lubricating Oil Consumption | 4.3 gm./Hr. | |
Standard Accessories | AC Plug – 3 Phase with Single Phase | 1 Pcs. |
Tool Kit | 1 Set | |
Welder Holder with Cable | 1 Set | |
Earthling Clamp with Cable | 1 Set | |
Oil Funnel | 1 No. | |
Owner’s Manual | 1 No. | |
Battery Terminal | 1 Set | |
Battery Tray & Holding Set | 1 Set | |
*Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current upto 40 Amps.) |
1 Kit (Additional Cost) Optional on request |
Costar Wheels | Optional (Wheels & Handle Sets) (Additional Cost) | |
Panel & Other Standard Features |
A.C. Circuit Protector (Single Phase) | Yes |
A.C. Circuit Protector (3- Phase) | Yes | |
Engine Oil Protection | Electronic Oil Alert & Indicator | |
Low Fuel Protection | Yes | |
A.C. Pilot Lamp (R, Y, B) | Yes | |
Fuel Level Gauge | Yes | |
A.C. Output Sockets (Single Phase) | 1 No. | |
A.C. Output Sockets (3- Phase) | 1 No. | |
Digital Hour Meter & Frequency (Hz.) Meter | Yes | |
Packing | Dimensions (L x W x H mm) | 710X500X600 mm |
Dry Weight (Kgs.) | 115 kgs. | |
Battery Capacity | 12 Volt, 35Ah, Size : 190x120x225 (LxWxH) | |
Above Specifications are for reference only, Because of continues improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation |
NOTE: All Standard Self Start Model Gensets Are Supplied Without Battery/ Battery to Be Procured By the Dealer /Customer Only.