| D C WELDING | Model | GE-3P-W8000RS |
| Maximum Output (Duty Cycle 60%) | 275 Amps. | |
| Working Voltage | 20v to 35 v | |
| Open Circuit Voltage | 70 Volt (Maximum) | |
| Current Regulation Amps | *40-275 | |
| Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge |
|
| Maximum Electrode diameter | 2.6 mm to 5.0 mm | |
| AC GENERATOR | Type | Brush less with Rear Earth Magnet Rotor. |
| AC. Voltage On Eco Mode | 220 Volts ± 10 Volts, Single Phase | |
| AC. Voltage On Power Mode (No Load) | 250 Volts ± 5 Volts, Single Phase | |
| Rated Current | 20.5 Amps. | |
| NFB Amps | 21 Amps. | |
| Rated Power | 4500VA | |
| Peak Power (for 1 Minute) | 5000 VA | |
| Frequency | 50 to 60 Hz. | |
| Class of Insulation | F | |
| ENGINE | Model | HM192P |
| Type | Single Cylinder Air-cooled; 4-stroke, OHV 25˚ Inclined | |
| Maximum Power | 16HP | |
| Bore x Stroke | 92×67 | |
| Displacement | 460cc | |
| Starting System | Recoil Start / Self Start | |
| Ignition System | TCI (Transistor Control Ignition) | |
| Fuel | Standard Petrol | |
| Fuel Tank Capacity | 15.5 Liters | |
| Fuel Consumption # Ltr./Hr. | 2.0 Ltr./hr. | |
| Continuous Operating Hour | Approx. 8 hr. | |
| Lube. Oil Capacity | 1200 ml. | |
| Lubricating Oil Consumption | 4.3 gm./Hr. | |
| Standard Accessories | AC Plug | 1Pec. |
| Tool Kit | 1 Set | |
| Welder Holder | 1 Set | |
| Earthing Clamp with Cable | 1 Set | |
| Oil Funnel | 1 No. | |
| Owner’s Manual | 1 No. | |
| Battery Terminal | 1 Set | |
| Battery Tray & Holding Set | 1 Set | |
| *Optional Accessories | Sheet Metal Welding Attachment (Helps to adjust low current up to 50 Amps.) |
1 Kit (Additional Cost) |
| Costar Wheels | Optional (Wheels & Handle Sets) @ (Additional Cost) |
|
| Panel & Other Standard Features |
A.C. Circuit Protector | Yes |
| A C. Pilot Lamp | Yes | |
| Engine Oil Protection | Electronic Oil Alert & Indicator | |
| Fuel Level Gauge | Yes | |
| A.C. Output Sockets | 1 Nos. | |
| Packing | Dimension LxWxH (mm) | 660x500x575 mm |
| Dry Weight (Kgs.) | 88 Kgs. | |
| Battery Specification | 12 Volt 25 Ah Size =190×120×225 (L×W×H) | |
| Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation | ||
NOTE: All Standard Self Start Model Gensets Are Supplied Without Battery/ Battery to Be Procured By the Dealer /Customer Only
Related Products
Kerosene Portable Generator Export Model
Rs.78,550.00
Generator Welding Machine (Petrol)
Rs.110,150.00
Petrol & LPG Portable Generators Series. (Single Phase) Export Model
Rs.68,750.00
Concrete Vibrator