| D C WELDING | Model | DIGITAL – W 250A |
| Maximum Output (Duty Cycle 60%) | 250 Amps. | |
| Working Voltage | 20v to 35v | |
| Open Circuit Voltage | 70 Volt (Maximum) | |
| Current Regulation Amps | *40-250 | |
| Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
| Maximum Electrode diameter | 2.6 mm to 4.0 mm | |
| AC GENERATOR | Type | Multiphase, Brush less with Rear Earth Magnet Rotor |
| AC. Voltage On Eco Mode | 220 Volts ± 10 Volts, Single Phase | |
| AC. Voltage On Power Mode (No Load) | 250 Volts ± 5 Volts, Single Phase | |
| Rated Current | 7.5 Amps. | |
| NFB Amps | 7.5 Amps. | |
| Rated Power | 1800VA | |
| Peak Power (for 1 Minute) | 2000 VA | |
| Frequency | 50 Hz. | |
| Class of Insulation | F | |
| ENGINE | Model | HM170FB |
| Type | Single Cylinder Air-cooled; 4-stroke, OHV 25˚ Inclined | |
| Maximum Power | 7.5 HP | |
| Bore x Stroke | 70×58 | |
| Displacement | 223cc | |
| Starting System | Recoil Start | |
| Ignition System | TCI (Transistor Control Ignition) | |
| Fuel | Standard Petrol | |
| Fuel Tank Capacity | 4 Liters | |
| Fuel Consumption # Ltr./Hr. | 1.1 Ltr./hr. | |
| Continuous Operating Hour | 4 hr. | |
| Lube. Oil Capacity | 600 ml. | |
| Lubricating Oil Consumption | 2.5 gm./Hr. | |
| Standard Accessories | AC Plug | 1Pcs. |
| Tool Kit | 1 Set | |
| Welder Holder | 1 Set | |
| Earthing Clamp with Cable | 1 Set | |
| Oil Funnel | 1 No. | |
| Owner’s Manual | 1 No. | |
| *Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current upto 50 Amps.) |
1 Kit (Additional Cost) |
| Costar Wheels | Optional (Wheels & Handle Sets) @ (Additional Cost) |
|
| Panel & Other Standard Features |
A.C. Circuit Protector | Yes |
| A C. Pilot Lamp | Yes | |
| Engine Oil Protection | Electronic Oil Alert & Indicator | |
| Fuel Level Gauge | Yes | |
| A.C. Output Sockets | 1 Nos. | |
| Packing | Dimension LxWxH (mm) | 630x500x600 mm |
| Dry Weight (Kgs.) | 50 Kgs. | |
| Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation | ||
Related Products
Generator Welding Machine (Petrol)
Rs.183,450.00
Generator Welding Machine (Petrol)
Rs.186,250.00
Generator Welding Machine (Petrol)
Rs.110,150.00
Generator Welding Machine (Petrol)
Rs.198,550.00